Download Stock ROM to unbrick X-BO Max Plus for all of you that wish to restore your device to the stock state.
Aside from that you will also enjoy the fixes in case your device’s experiencing stuck at bootloop and softbrick. As for those who wish to get their lost warranty back can also flash this X-BO Max Plus stock ROM now.
On this post you are not going to be able to download stock ROM for X-BO Max Plus but you will also be guided to flash the stock ROM on your smart device. Anyway without further ado let’s flash it after reading the following benefits and disadvantage lists.
Benefits of flashing stock ROM / firmware
- Can fix bootloop.
- Can fix brick.
- Can restore your device’s warranty.
- Can once again receive OTA update through system update notification directly on device.
- Your device will be more secure.
Disadvantage of flashing stock ROM / firmware
- Your root access will be gone.
- Your installed custom ROM will be replaced with the stock ROM.
- Your installed custom recovery will be substituted with the stock recovery.
Download the following files to your PC or laptop.
|ROM X-BO Max Plus||H920W_V1_H_XBO_K18H1_MAX_1S_V1.1 – full_h920w_v1_h_xbo_k18h1_max_1s-user 6.0 MRA58K – Latest Update|
Steps to flash stock ROM on X-BO Max Plus using SP Flash Tool
Make sure all data that are precious already being back up.
- Download the SP Flash Tool and the USB drivers on your PC, then extract all the files.
- Afterward install all the files. (Skip this step if you have done it).
- Now open the extracted SP Flash Tool folder then find the Flash_Tool. Once you found it then double-clicking on it to select the Run As Administrator to launch the software.
- Once the SP Flash Tool is opened, then on Download tab, select the Scatter Loading button to grab the Scatter File (.txt extension) from your PC. (Scatter file / .txt is the stock ROM you want to flash).
- Now go to the Firmware / Stock ROM folder, then open the Android_Scatter.
- Then the SP Flash Tool will load the Android_scatter file.
- Now click on the Download button.
- You need to Power Off your device now (If the battery is removable then remove it first on its place, if not then just continue).
- After your device’s powered off, then use your USB cable to connect it to computer.
- Press Volume UP or Volume Down to fasten the connection between your device and computer. (Skip this step if your device is instantly connected).
- Now the flashing processes will start, if it’s go on normally, you will see a progress bar in yellow color on the SP Flash Tool as indicator. So wait until it’s 100% completed.
- The flashing processes will be completed and it’s indicated with the following sign.