Install G925PVPU4DQC7 On Galaxy S6 Edge SM-G925P SPR Spint (CDMA)

Install G925PVPU4DQC7 (VPU4DQC7) Android 7 on Galaxy S6 Edge SM-G925P SPR Spint (CDMA) phone. This month Samsung is quite busy for delivering firmware updates continuously to number of its flagships and now the Galaxy S6 edge SM-G925P SPR Spint (cdma) gets its turn to be installed with an official software with build number G925PVPU4DQC7 that comes with Android 7 Nougat. It is said the firmware is also a wide updates to Samsung’s owned apps too. So you are fully welcomed to immediately grab the firmware through OTA or Samsung KIES.

But of course you can also bring it to your device manually as the firmware is available to be downloaded to your computer and then be flashed to your device using the one handy flasher; Odin. If you are interested more taking the manual installations then on this post you will be guided through the entire steps for flashing the firmware.

Advertisements.

But of course you are recommended to firstly read the following preconditions to make sure you are already prepared yourself before flashing.

Install G925PVPU4DQC7 On Galaxy S6 Edge SM-G925P SPR Spint (CDMA)

Preconditions.

  • G925PVPU4DQC7 (VPU4DQC7) Nougat must be installed on the Galaxy S6 Edge SM-G925P SPR Spint (CDMA) device only.
  • If there is a root access on your device then flashing this stock ROM will wipe it out.
  • In case your device is powered with custom ROM, custom recoveries or other third-party tweaks then all of them will be erased.
  • Your device will be taken back to the factory settings and if you have lost warranty then it will be restored guys.
  • Be sure you also perform the enable USB debugging mode of Samsung Galaxy S6 Edge in case you haven’t done it guys.
  • Make backups to all data you believe will be erased by this stock ROM.
  • Follow all steps and do not ignore anything.
  • All the lucks for you.

Firmware details.

  • Model SM-G925P.
  • Model name Galaxy S6 edge.
  • Country Spint (cdma).
  • Version Android 7.
  • Changelist 10994289.
  • Build date Fri, 24 Mar 2017 04:31:45 +0000.
  • Security Patch Level 2017-03-01.
  • Product code SPR.
  • PDA G925PVPU4DQC7.
  • CSC G925PSPT4DQC7.
  • REGULAR DOWNLOAD.
  • Approx. 15 kB/Sec.
  • Non-Premium Members.

Disclaimer.

InstallAndroidROM.CO.UK should not be held responsible for any possible risks applying the guides to flash the stock ROM.

Download G925PVPU4DQC7 (VPU4DQC7) firmware and Odin.

 

 

Extract the zip file to your PC.

How to install G925PVPU4DQC7 (TYU4BQC) Nougat update on Galaxy S6 edge SM-G925P SPR Spint (cdma)

Firstly I recommend you to make backups then make sure you follow the steps all of them and do not skip any steps.

 

Instructions.

  1. Firstly you need to shut down your device by choosing the Power Off option.
    Power Off Samsung Galaxy Device
  2. After your device’s shut down then boot to the Download Mode by holding these three buttons;  Volume Down + Power + Home.
    Boot Samsung Galaxy Download Mode
  3. You will see a Warning!!! Then release all the pressed three buttons replace them with pressing the Volume UP button to access the Download Mode.
    Warning Download Mode
  4. Now to your PC, then launch Odin by clicking the file name, just like in the picture below.
    Odin On PC
  5. Once Odin is opened just connect your Samsung device to your computer.
    Connect Android Device To PC
  6. Odin will then detect your device, if your device is detected, you will see this notification Added!!! on Odin.
    Added Root Odin
  7. Clik on PDA button on Odin and then find the firmware / stock ROM on your computer.
    PDA Root Odin
  8. Now click the Start button to begin the flashing process.
    How To Restore Samsung Galaxy With Stock ROM
  9. You will see Pass notification if Odin has successfully flashed the Samsung stock ROM on your device guys.
    Install Stock ROM Samsung Galaxy
  10. Finish my friend.

Well done friend.


Leave a Reply

Your email address will not be published. Required fields are marked *