Lenovo A7600 S8 48 Flash File Lollipop Update


Download Lenovo A7600 S8 48 Lollipop firmware flash file to those who have the device and want to fix any possible technical errors such as bricked or bootloop or any other kind of errors.

As we know that the stock can be used to help us fixing technical problems that we usually face such as bootloop or brick, as we have tendency to make our phone to run out of default through modifications. Because of modifications, potential errors could happen, that’s why the legit solution is by flashing stock ROM or firmware.

Since you are here that means you are at the right place to download firmware or stock ROM for your Lenovo A7600 S8 48. And you will also be guided to flash the firmware through the steps I have compiled for you to follow. And remember that doing so will wipe out your non-stock ROM, root package and custom recovery image.

Benefits of flashing stock ROM / firmware

  • Can fix bootloop.
  • Can fix brick.
  • Can restore your device’s warranty.
  • Can once again receive OTA update through system update notification directly on device.
  • Your device will be more secure.

Disadvantage of flashing stock ROM / firmware

  • Your root access will be gone.
  • Your installed custom ROM will be replaced with the stock ROM.
  • Your installed custom recovery will be substituted with the stock recovery.

Download the stock ROM for Lenovo A7600 S8 48 Android 5.0 (Lenovo A7600 S8 48 Lollipop firmware flash file Update).

A_7600_1511_for_flashtools.zip (1.2G).

For other Lenovo stock ROM types.

Files you need.

Steps to flash Lenovo A7600 S8 48 stock ROM using SP Flash Tool

Make sure all data that are precious already being back up.

  1. Download the SP Flash Tool and the USB drivers on your PC, then extract all the files.
  2. Afterward install all the files. (Skip this step if you have done it).
  3. Now open the extracted SP Flash Tool folder then find the Flash_Tool. Once you found it then double-clicking on it to select the Run As Administrator to launch the software.
    Run As Adrministrator On PC To Open SP Flash Tool
  4. Once the SP Flash Tool is opened, then on Download tab, select the Scatter Loading button to grab the Scatter File (.txt extension) from your PC. (Scatter file / .txt is the stock ROM you want to flash).
    Press Scatter File To Select Android Scatter On SP Flash Tool
  5. Now go to the Firmware / Stock ROM folder, then open the Android_Scatter.
    Select Scatter File On SP Flash Tool
  6. Then the SP Flash Tool will load the Android_scatter file.
  7. Now click on the Download button.
    Download Scatter File Via SP Flash Tool
  8. You need to Power Off your device now (If the battery is removable then remove it first on its place, if not then just continue).
    Power Off Samsung Galaxy Device
  9. After your device’s powered off, then use your USB cable to connect it to computer.
    Connect Android Device To PC
  10. Press Volume UP or Volume Down to fasten the connection between your device and computer. (Skip this step if your device is instantly connected).
  11. Now the flashing processes will start, if it’s go on normally, you will see a progress bar in yellow color on the SP Flash Tool as indicator. So wait until it’s 100% completed.
    SP Flash Tool Flashing Firmware
  12. The flashing processes will be completed and it’s indicated with the following sign.
    SP Flash Tool Completes Flash Stock ROM
  13. Done.


Please enter your comment!
Please enter your name here