Download B353 Nougat Update For MediaPad M3 (China)

0
3

Download B353 Nougat Update for MediaPad M3 (China) from this post. Recently Huawei released Nougat update with build number BTV-DL09C233B353/BTV-W09C233B353 for MediaPad M3 BTV-DL09 and BTV-W09 variants bringing Android 7.0 Nougat for China. The ROM is based on the Huawei latest UI which is EMUI 5.0 OS. The firmware is the official stable build.

So if you have been waiting for the firmware update, this is the time for you to grab it, you can use the Over The Air utility from your device by checking the system update or you can download the B353 Nougat firmware update for MediaPad M3 from this post because we are providing the direct download link for you to download.

Advertisements.

MediaPad M3 is a good device armed with an Octa-Core Kirin 950 processor supported with 4GB RAM and 32 or 64 GB storage that can be increased to 256GB with microSD. The device itself is a great therefore you need to serve its great with the stock ROM that will keep it secure, fast and nearly bugs-free.

Firmware details.

  • Device – MediaPad M3.
  • Model – BTV-DL09/BTV-W09.
  • Android Version – 7.0.
  • EMUI Version – 5.0.
  • Firmware – B353.
  • Build Number – BTV-DL09C233B353/BTV-W09C233B353.
  • Region – China.
  • Status – Official.
  • Type – Full firmware image.

Points to note.

  • This official BTV-DL09C233B353/BTV-W09C233B353 is for MediaPad M3 (China) variant only.
  • Follow the entire steps without skipping any of them. Fail to do so will effect of bricking your device.
  • Backup if it is needed.
  • Charge your device batter power if you consider will not enough to perform the guides.
  • Your existing data will be removed therefore make backups first.

Download MediaPad M3 B353 Nougat Update Files

1) Nougat update for BTV-DL09 MediaPad M3 China (BTV-DL09C233B353)

2) Nougat update for BTV-W09 MediaPad M3 China (BTV-W09C233B353)

How to install stock B353 Nougat Firmware on MediaPad M3

Make sure you follow all the steps in every method of your choice and do not skip any steps.

Method 1

  1. After you downloaded the above firmware file, now extract the file.
  2. You need to create a folder on your device namely dload inside your SD Card root, then place the update.app file within the dload folder.
  3. Now to your phone app, dial this combination;  *#*#2846579#*#* this is needed to open a menu that is hidden.
  4. Now click the Project Menu -> Software Upgrade -> SDCard Upgrade.
    Select and run the update now.
  5. The installation will start, just wait for the entire processes to finish, once it’s done reboot your device.
  6. Finish.

Method 2

  1. Once you’ve downloaded the update_data_full_hw_xx.zip above firmware file, extract it.
  2. You need to create a folder on your device namely dload inside your SD Card root, then place the update.app file within the dload folder.
  3. Power off your device now.
  4. Once your device’s powered off, press and hold these buttons; Volume Up + Volume Down + Power buttons at the same time. This will start the updating process.
  5. Now just wait for the processes to be done.
  6. Finish.

LEAVE A REPLY

Please enter your comment!
Please enter your name here